|
**ASIANWOLF
FM 2009 V2.0 MEGA PACKAGE DEAL!!!** |
|
 |
|
THIS ALARM
INCLUDES EVERYTHING YOU SEE
"EVERYTHING?...... YES!"
MODEL: EB-2009MEGA
PLUS A
FREE WIRING DIAGRAM!!!
JUST SPECIFY
THE MAKE AND MODEL OF YOUR VEHICLE WHEN ORDERING |
|
|
FEATURES:
•
Two
Carbon Fiber 5 Button 2-way LCD Remote Controls With Vibrating Motor
• Built-In Parking-Light Relay Programmable (+/-)
• Pre-wired Super Bright Blue LED, Sensor, and Valet Switch Connectors
• Plug-in user programmable Coded Override Switch
• Plug-in Dual-Zone Dual Adjust Piezo Sensor
• Horn Or Ignition 3 (Programmable) (-) Output
• Remote Door Locking/Unlocking (-) outputs
• Passenger Unlock (-) Output
• Two Auxiliary Channels with Selectable Output Types, (Pulsed, Timed or
Latched)
• User-Selectable Passive Arming
• User-Selectable Auto-Rearming
• Remote Panic with Smart Locking/Unlocking
• User-Selectable Auto Lock -With Ignition or RPM dependant
• Remote Keyless Entry and Accessory Activation Even in Valet Mode
• Remote-Controlled Courtesy Lighting
• Auto Activation Upon Arming And Disarming of Auxiliary 2 Output for
Comfort Closure (windows)
• Auto Disarm with Auxiliary 1 Activation (Trunk Release Output)
• Smart Remote Trunk Release
• Alarm Trigger Identification
• Turbo Timer
STARTER FEATURES:
• Tachless Mode --ADSP-- Adaptive Digital Signal
Processing , A Unique Computer Algorithm That Combines Multiple Signal
Inputs To Determine If Engine Is Running, Most reliable Smart Engine Run
Sensing, Will Work On All Cars And Trucks Including Diesel Engines.
• RPM Pulse Finding Mode Indication
• True RPM Sensing for Real Time Cranking
• Gas or Diesel Mode with glow plug input
• Cold Start Timer (Programmable)
• Dedicated Starter Active Output (-) for factory transponder bypass
• Starter Disable Output (-) for Anti Grind feature
• Factory Disarm Output (-)
• Factory Rearm Output (-)
• Programmable Aux. Relay outputs (2nd. Ignition, 2nd. Accessory or 2nd.
Starter)
• Stop & Go Mode
• Selectable Engine Run Time
• Enable or Disable Remote Start in Valet Mode
WHAT CAN THIS
SYSTEM DO? WHAT DOES IT HAVE?
IT IS
A CAR ALARM
IT HAS A BUILT IN REMOTE STARTER SO THAT YOU CAN START YOUR CAR WITH THE
REMOTE CONTROL
IT HAS A PAGING SYSTEM THAT WILL PAGE YOU IF ANYONE TAMPERS WITH YOUR CAR.
IT WILL EVEN SHOW YOU ON THE LCD DISPLAY WHAT PART OF THE CAR WAS TAMPERED
WITH
THE RANGE OF THIS ALARM IS ABOUT 2500 FEET. IT WILL PENETRATE MOST WALLS,
CEILING, CAR GARAGES ETC.
IT ALSO COMES WITH A DUAL ZONE SHOCK SENSOR THAT IS FULLY ADJUSTABLE FOR
SENSITIVITY
IT HAS A KEYLESS ENTRY SYSTEM SO THAT YOU CAN LOCK OR UNLOCK YOUR CAR DOOR
WITH THE REMOTE
IT HAS POWER DOOR LOCK RELAYS BUILT INTO THE UNIT SO YOU DON'T HAVE TO WORRY
ABOUT PURCHASING MORE RELAYS
IT HAS A 2ND CHANNEL OUTPUT SO YOU CAN POP YOUR TRUNK WITH THE REMOTE
CONTROL
IT HAS A BACKLIGHT DISPLAY FOR NIGHT TIME VIEWING
YOU CAN ADD EXTRA ACCESSORIES TO IT: GLASS SENSOR, WINDOW ROLL UP MODULE,
ETC..
IT IS DIFFICULT TO INSTALL BY YOURSELF.
|
PAGER / REMOTE TRANSCEIVER:
The hand-held remote transceiver is used to send commands
to and receive information from the 2009 FM Alarm system. The remote has a built-in clock timer so that you can program the remote to start your vehicle at any time.
The Control Module transmits High Frequency FM signals
to the pager for various alarm functions up to 1 mile away.
Range will vary depending on location, terrain, and RF
noise interference. This system is not guaranteed to page
you if you are behind concrete walls underground, in a large
structure, or an area with high electronic interference.
Handle pager/remote with care as the LCD display and/or
the electronics may be damaged if abused. Some icons and
areas of the LCD panel are not used or do not animate.
These areas are for future improvements and expansions of
this system. Pull up the built-in antenna on the top left of
the unit when additional range is required. Push the antenna PAGE/
in for storage in a pocket or purse. The transceiver uses a
standard AAA Alkaline Cell battery that can easily be
replaced by removing the access cover on the back
of the unit. Battery life will vary depending on usage.
(4-5 months on average).
EMERGENCY OVERRIDE:
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will
have to perform an emergency override to disarm the system. Open the door with the key, (alarm
will sound) turn the Ignition ON and press and hold the overide/program button about 3 seconds.
The Alarm will disarm, and enter the Valet mode to allow you to use the vehicle. You can
repair/replace the pager/remote or see your installing dealer for assistance.
TRUNK POP/AUXILIARY FEATURE: (Optional)
To pop the trunk or activate an auxiliary feature, press button (III) on the transmitter for about I
1/2 seconds until it beeps. Trunk pop feature is recommended for vehicles equipped with a Factory
Electric trunk release. Extra parts and/or labor may be necessary for this feature. If the system is
armed, pressing button (III) may or may not trigger the alarm system when opening the trunk
depending on programming option #10 configuration
REMOTE ENGINE STOP:
To stop (abort) a remote start, Press and hold Button (II) on the transceiver for about 1 1/2, seconds
until it beeps. The alarm will acknowledge the abort remote start request by transmitting back to
the Transceiver with (2) sets of 3 beeps. The LCD Display will show a Key with slash and the
Engine Run icon will flash (2) times and turn off. The will remain armed if it was armed before
the remote start took place. If the vehicle was not armed, it will remain locked after the remote start
abort.
ARMING:
Press the (1) button on the transceiver to arm the system. The LCD Display will show "ARM" and "LOCK" icons while emitting a single beep. At the vehicle the siren will chirp once and the lights will flash once. The red LED in the vehicle will start flashing. The system will arm, lock the doors, and the starter will be disabled (Optional).
VALET MODE:
To disable the Alarm and Remote Start sections of the system while still allowing door lock/unlock,
turn the igntion ON and press the override/program button until the dash LED turns on solid and
one siren chirp is heard (about 5 seconds). Repeat the process to exit valet mode (LED will turn
off, lights flash twice, and chirps twice).
REMOTE ENGINE START:
Press and hold Button (II) on the transceiver for about 1 1/2, seconds until it beeps The alarm will
acknowledge the remote start request by transmitting back to the Transceiver with 3 beeps and the
Key/Engine Run icons on the LCD Display. At the vehicle, the unit will chirp (3) times and the
parking lights will turn on solid. After powering up the Ignition and Accessory circuits, the unit
will start the vehicle and run for 15 or 25 minutes (whichever is programmed). Once the vehicle
is running (in the first 8 seconds) the control module will page the remote with engine run status
(LCD display will show a spinning engine run and exhaust). If the vehicle fails to start on the first
attempt, the system will try (2) more times before aborting the remote start process.
ENTERING A REMOTE STARTED VEHICLE:
To enter a remote started vehicle, press bunon (1) to Unlock/Disarm, insert key and turn on to the
run position [DO NOT Turn the key to the Start position or you damage the Starter!], tap on the
foot brake to reset the unit and drive away as normal. The key is now operating the vehicle. The
optional ANTI-GRIND feature and can help to avoid starter damage from turning the key over and
re-engaging the starter on a nunning engine
DEFECTIVE ZONE ALERT/BYPASS:
If the system detects a faulty or open zone (Door left open) when the system is ACTIVELY
ARMED, the siren will chirp (3) times, give (3) light flashes, and the control module
will page the remote with the open zone (Door or Trunk) The faulty zone will be
automaticallv bypassed.
AUTOLOCK/UNLOCK WITH IGNITION: (Programmable)
The doors will automatically lock when the ignition is turned on and will unlock when the ignition
is turned off. If a door is open the unit will not lock to prevent keys from being locked in.
PASSIVE ARMING / PASSIVE LOCK MODES:
If programmed for passive (Automatic) Arming, the system will Arm itself 30 Seconds after the
ignition is turned off and the last door has been closed. The LED will begin flashing rapidly while
counting down to Passively Arm. If a door is open or reopened during the countdown the system
will wait (LED solid) for the door or zone to close before arming. The unit will chirp once and flash
the lights once. If Passive Locks are programmed ON then doors will lock also.
Note: Passive Arming may qualify for insurance discounts-check with your agent or proprietor.
Passive locking may increase the chance of locking the keys inside the vehicle.
DISARMING:
Press the (1) button on the transceiver. The LCD Display will show "DISARM" and "UNLOCK"
icons while emitting (2) beeps. At the vehicle, the siren will chirp (2) times and the lights will flash
(2) times. The red LED in the vehicle will turn off. The system will disarm unlock the doors, and
the interior dome light will turn on if these optional featrures are installed.
SILENT ARM/DISARM: (Programmable)
The system can programmed to ARM and DISARM silently without Siren Chirps. See programming
Option #4. Note: When programmed for silent ARM/DISARM the Remote Start confrmation
chirps will no longer be heard.
Examples:
* You pull up to a convenience store for a quick stop, "Idle Down" mode keeps engine running
when you exit the vehicle, (with keys in hand) and arm the alarm. When you return, unlock/disarm
alarm, turn ignition ON and drive away.
' Some Turbocharged vehicle manufacturers recommended that the driver leave the car at idle
for a short time after along or vigorous drive before turning the car off. This allows the turbo
to cool down.
With engine running, press and hold the brake pedal and push button (1) on the Transmitter The
parking lights/remote start will turn ON. Turn Off the Ignition and remove key while engine will
remains running. Exit vehicle and arm the system. The Engine will remain running for programmed
run time, until you return, or it can be turned off at any time through Button (II).
IDLE-DOWN:
This mode allows the unit to take over operation of the parked vehicle while the ignition key is
removed and you exit the vehicle. The vehicle is put into a remote running condition before you
exit and it will remain running for the programmed run time or until you come back.
SVC ACTIVE RE-ARMING:
Active Re-arming allows the system to re-arm itself 30 seconds after it is disarmed with the
transminer in the event that a door has not been opened. This is handy if the vehicle is accidentally
disarmed without your knowledge (Remote is pressed while in your pocket/purse). This feature can be turned off with the programming options.
TRIGGERING THE ALARM:
After a short 5 second Arming delay (to allow vehicle/electronics to settle) the system becomes
fully armed.
SELF-START MODE: (Programmable)
The vehicle can be programmed to start every I or 2 hours automatically during extreme weather
conditions. DO NOT leave vehicle in a closed garage with this feature activated! First make sure
the self-start mode has been enabled with program option #&. (Unit starts every 2 hours by default)
Use program option #9 to change interval time if needed. To start self-starting mode press and hold
the brake pedal and the Valet button then Button (II) on the transceiver for about a second. The
parking lights will flash 5 times and the vehicle will automatically start and run for about 30 seconds
then turn off by itself From this point on as long as you don not press the brake pedal or the Remote
Start button on the Transmitter the vehicle will start by itself after the pre-programmed time period
(I or 2 hours). Vehicle will self-start a maximum of 12 times.
After that, you will need to go through the brake/override/button (II) procedure again.
INTRUSION:
If there is an intrusion (door/hood/trunk opening) the alarm will sound with siren,
followed 8 seconds later with alternating light flash / horn honk (optional) for 45 seconds. The 8-
second delay before flashing lights/honk is to allow the control module to transmit signals to the
pager/remote. The remote will emit an audible alert and the LCD Display will show a Trunk or
Door Opening icon along with audible beeps.
SVC INDICATOR:
If the unit is out of range or the pager/remote and the base unit do not communicate properly, the
SVC indicator will appear on the LCD display. Sometimes this is caused bv trying to send commands
to the vehicle while it is in turn trying to page the remote. Be sure to wait about 8 seconds between
functions to avoid this message or move closet to vehicle if you are getteting this message from
being out-of-range. Status Check feature also serves as a range test.
IN-CAR CALL/PAGE:
Press and hold the prograrm/overide button in the vehicle for about a second to initiate a page to
the remote.
ANTI-GRIND / STARTER DISABLE (Optional)
Prevents the user from accidentally grinding the starter if the Ignition key is turned too far to the
start position while engine is already running from the remote starter. Starter circuit is automatically
disabled when alarm is armed to protect the vehicle front "Hot Wiring".
ALARM STATUS CHECK:
To perform a status check, press Buttons (1) and (II) together tor about 1 1/2 seconds
until the remote beeps twice. The control module in the vehicle will report back to the
pager/remote whether the system is ARMED, DISARMED, or ENGINE RUNNING or
the LCD Display.
HOOD OPEN 8 BRAKE PEDAL SAFETY CIRCUITRY
Both the hood pin and brake switch will prevent the engine from being remote started. Both circuits
will also cause a remote started engine to shut down if activated while running. This helps eliminate
the risk of injury to someone working under the hood or tampering of the vehicle. If a Remote start
Is requested with the hood/brake active, the lights will flash twice and the unit will not attempt a
start.
1. This unit will remote start whether the alarm is on or off Starting the engine will not trigger the
alarm system if it is in the armed mode when performing a remote start.
2. The vehicle will still be protected when armed/remote started if a door/hood/trunk is opened the
alarm will trigger and the engine will shut down automatically.
3. Quickly pressing button 3 will reset any active message icons on the LCD display.
4. If the alarm Is triggered by opening the hood, the LCD Display will show and page as a trunk
violation on The LCD remote does not have a separate Hood-opening Icon.
5. The control module may not respond to multiple commands. You must allow up to 8 seconds
between functions because the unit is sending/paging information to remote/pager.
6. Valet mode inhibits the alarm, remote start, and in-car page/call features.
Arm System
Disarm System
Remote Start
Stop Engine
Trunk Pop
HoodTTrunk Alarm Trigger
Door Alarm Trigger
Sensor Pre-Wam
Sensor Trigger
Out of Range
Miscommunication
Low Battery
DOME LIGHT ILLUMINATION: (Optional)
This feature turns on the vehicle's dome light upon disarm for 30 seconds or until the
key is inserted and turned on. This will provide illuminated entry to your vehicle at
night or in dimly lit areas for safety and security.
SHOCK/IMPACT:
A hard impact or shock to the vehicle body will trigger the shock sensor and trip the
alarm system as listed above. The LCD will Display Hammer and Glass-Break icons. This may
or may not mean that there is actually glass breaking on the vehicle but it is a reminder to you that
a hard impact was detected.
ALARM PRE-WARNING:
If a low-level shock to the vehicle body is detected, the pre-waming sensor activates sounding 5
quick siem chirps and I light flash. The transceiver will emit an audible alert and the LCD Display
will show a Hammer Icon. To adjust the shock sensor, turn its control knob to increase sensitivity
or decrease sensitivity.
ARM/Downward Lock Arrow = 1 Beep
DISARM/Upward Unlock Arrow = 2 Beeps
KEY/Engine Icon Spins = 3 Beeps
Key Icon with Slash = 3 Beeps (2X)
Trunk Opens on Car = 6 Beeps
Door Opens on Car = Ring + 3 Beeps
Hammer on Car = Constant Beep
Hammer/Breaking Glass = Ring + 2 Beeps
Flashing "SVC" Icon=None
Hashing" SVC" Icon=None
Flashing Battery Icon
PRIOR INTRUSION ALERT:
If the system was tripped in your absence, the dash LED will be flashing rapidly. Wher
the system is disarmed you will hear 4 chirps when disarming the system. Carefully
inspect your vehicle to see if there is any damage or a theft has occurred.
PANIC FEATURE:
In the event of an emergency situation or to attract attention to your vehicle press and hold button
(1) on the transmitter for about (5) seconds. The Siren will sound and lights will flash. Press bunon
(1) again to reset. |
Call us toll-free: 1-800-282-1351
;)
