Introducing the Asianwolf 8100 RSX LCD pager remote start car alarm with pager.
This security system is the very first image-capture transmitting car alarm. This means that, for the first time, a camera mounted in the vehicle will take a photograph of the thief and send his image instantly to your LCD remote pager. The Asianwolf 8100 RSX is not only the very first of its kind – it also boasts a full range of features, unmatched in today’s after market vehicle security systems.
The 8100 RXS is basically a combo of 4 parts.
The first part is a paging system, that will page your remote in the event of an attempted intrusion or break in. By viewing the LCD screen on the 2 way pager, you will be able to instantly tell which zone was violated
The unit comes with 1 x 1- way remote and 1 x 2-way LCD remote start paging remote. The 2 way remote boasts an extremely brilliant 65000 color LCD screen. The LCD remote casing is made out of carbon fiber and it takes just 1 AAA battery that lasts about 3 to 6 months, depending on use. The paging distance from car to remote is approximately 2,500 feet, line of sight.
The second part is an image-capture, zone-triggered activation system that will take an image of a thief and send his image to your remote pager for your viewing
The third part is a remote starter. This means that you are able to start your car with the remote from inside the comfort of your home, allowing you to warm up your vehicle to be ready when you are.
And the fourth part is a fully functioning car alarm featuring keyless entry, automatic arming, ignition lock, shock sensor and all doors protected, including hood and trunk. Also included is a 128 decibel 6 tone siren, for maximum performance.
All 4 parts come together to form one supreme vehicle security system.
The system works on manual or automatic transmission, gas or diesel engine and comes complete with installation guide and all wiring necessary for complete installation, although some newer cars may require a bypass module or transponder to bypass the “chip” in the car key in order to remote start your vehicle.
As this is a complex system, we recommend professional installation only by a legitimate alarm shop and preferably an installer with over 10 years experience in car alarm installation.
Remember, the quality of this system is only as good as the quality of the installation.
|
- A Camera - This car alarm camera is mounted on the
inside of the car and will snap a photo of the person breaking into your
car. It will then send an alert to your handheld LCD remote along with his
photo image. This car alarm camera also has a built-in flash for nighttime
pictures.
- Remote Start - Start your car with the remote. Now
you can start the car from the comfort of your home or office with a push
of a button. The range is up to 3000 feet. You can also start the car all
by it self everyday so that your car engine is warmed up and ready to go
when you are. This feature is very useful during hot summer days or in
very cold winter climates. By the time you’re ready to start driving and
get in your car, your car is either nice and cool or cozy and warm.
Imagine that! No more getting into a hot car and getting burned by the hot
seat. Or getting into a freezing car and waiting several minutes for the
heater to began working. If for some reason you decide not to drive and
forget to turn it off, it will automatically shut done the engine after a
few minutes. The run time can be pre programmed for 10, 15, or 30 minutes
after which the engine will shut down. If someone was to try to break
into your car and drive away while it’s running, the car engine will shut
down automatically the moment they open the doors or step on the brakes.
Compatible with gas or diesel engines.
- Turbo Timer – This car alarm remote starter has a
turbo timer that will keep your car running after you have parked the car.
The engine will continue to run for a pre programmed run time to allow
your turbos to cool down. If your car does not have a turbo engine, then
this feature is not used.
- Paging Alert - Page you instantly to let you know if
someone is trying to steal your car. If anyone tampers with your car and
tries to break in, this car alarm will send an instant signal to your
remote alerting you by either beeping or vibrating.
- LCD Display - Show you on the LCD remote exactly
what part of the car has been tampered with. For example, if they opened
your car door, then an image of an open door will appear on your car
alarms LCD screen. If your trunk was opened, then an image of an open
trunk will show up on the screen.
- Driver Paging – It’s a button that is placed inside
the car that once pressed, will send a page to the car alarm remote. For
example, you’re in a supermarket while your girlfriend is waiting for you
in the car. She is suddenly harassed by a homeless person or criminal and
is in fear for her life. With one push of the button, the car alarm will
send an immediate page to your alarm remote notifying you of her distress.
- Siren Disable – Allows you to disable the siren via
the remote. This is very convenient if you live in a very quiet
neighborhood and don’t want to wake people up when you arm or disarm the
alarm. Instead, your LCD remote will either page or vibrate to give you
confirmation as to the status of your car. This is silent alert is also
helpful if you want to catch thieves in the act. When your car is tampered
with, the siren will not sound. Instead the car alarm will page your
remote allowing you to catch them in the act.
- Keyless Entry - Allows you to lock or unlock the
car doors with your remote. Your car must be equipped with power door lock
to use this feature. If you do not have power door locks, then you can add
a door lock motor (Also known as door Actuator) to each door and then tie
it into the alarm system. Door lock motors can be purchased from our
car alarm accessories page.
- Ignition Lock / Unlock – This car alarm can be
programmed to lock the doors automatically when your car is started and
then unlocked when you turn off the engine.
- Automatic Arming – This car alarm can be set to
automatically arm your alarm and lock your doors 30 seconds after leaving
the vehicle. Useful for times when you forget to arm it yourself.
- Dual Zone Shock Sensor – A sensor placed inside your
vehicle to detect hard impacts to your vehicle such as a smashed window or
a hit and run. It has a smart sensor that will chirp a warning for low
impacts or activate the alarm for harder impacts. It can even discern
false triggers from such things as high winds or road vibration and ignore
them.
- Trunk POP - Unlock the trunk of the car with a push
of a button. Perfect when you have a bag of groceries in your arms. Also
know as “Trunk Pop” This is perhaps one of the most overlooked and under
installed component. Some cars may require a solenoid. Don’t know whether
or not you need a solenoid? If you pull a cable to unlock your trunk, then
you do need one. If you push a button in the car or on a remote to unlock
the trunk then you do not need one as you already have a solenoid
installed in your car. The alarm will just tie into the solenoid and
you’ll be able to unlock the truck with the remote.
- Window Roll Up - This car alarm can automatically
roll up & close your windows whenever you arm the alarm. Your car must
have power windows to do this and you’ll have to purchase a window roll up
module that will tie into your alarm and car window. Please visit our
car alarm accessories page to see more information on window roll up
modules.
- Auxiliary Channel – This car alarm system has a
channel that you can use to control with the remote. You can control just
about anything with a push of your car alarm remote. For example, you can
activate certain devices such as a car radio or a window rollup module to
close your car windows. You can use it to activate certain car gadgets
like led lighting or car horn or talking siren. Use it to control you car
radio volume or door poppers. The possibilities are endless.
- Separate door lock/unlock – With this feature, you
can push the unlock button once and only the drivers door will unlock.
Press it again and all the doors will unlock.
- Starter Disable – When you armed the alarm, the car
engine’s starter wire will be disabled preventing the car from being
started and driven away. Whether the car is hotwired or if an actual key
is used, the car will not start. When the car alarm is disarmed, the car
engines starter wire will be enabled allowing the car to be started as
normal. However, you’ll need to purchase a starter disable relay for this
feature to work but don’t worry, It’s less than $5 Bucks and can be
purchased from our
car alarm accessories page.
- Negative when Armed output – Allows you to add
additional Sensors and Accessories that will activate once the alarm is
armed. For example, You can add a radar motion sensor or window rollup
module to the alarm and once the car alarm is armed, it will activate them
automatically.
- Anti Scan Code Hopping – This car alarm rotates the
frequency to prevent thieves using a scanner to capture your alarms code
and cloning it to disarm your car.
- PC Hookup – Allows you to connect to a pc using our
software and cable (not supplied) to program the alarm features and
parameters. However, the alarm can still be programmed with the remote.
The Scytek Software and cable can be purchased from our
car alarm accessories page.
- Valet Switch – A switch installed inside the car
that allows you to deactivate the alarm as if it does not exist. For
example, when you have the valet park your car, you can deactivate the
alarm system so that the valet parker will not have to worry about using
your car alarm. Also helpful when loaning your car to someone who is
uncomfortable using the alarm system.
|
This Asianwolf Car Alarm can do so many things. We know it gets very confusing when shopping for car alarms so here is a list of what this car alarm system can do. You will be amazed.
-
Full Color Camera
with Night Vision
-
Automatic picture
capture upon security violation
-
Selective picture
capture through the remote
-
Store and recall up
to ten discrete images on the LCD remote.
-
One Carbon Fiber
2-Way True Color Picture remote control.
-
One Carbon Fiber
Slick 5-Button Remote With Super Bright Blue LED
-
Built-In
Parking-Light Relay Programmable (+/-)
-
One 5 button code
hopping remote control Sleek Carbon Fiber with Super Bright Blue LED
-
Plug In LED and
Override Switch
-
Remote Start Tachless
Mode using Adaptive Digital Signal Processing -compatible with all
vehicles
-
Remote Start Tach
Monitor
-
Starter Interrupt
Output
-
Dual stage Electronic
Impact sensor
-
Power door lock
control
-
Trunk Release
-
Parking Light Flasher
programmable polarity
-
Courtesy Light
Control
-
Anti-grind Option
-
Gas or Diesel
compatibility
-
Cold Start timer
-
Selectable Engine Run
Time
-
Turbo Timer
(adjustable)
-
Smart Network Port
-
Easy programming Via
your PC, Pocket PC or Valet sw. and Remote Transmitter
|
|
|
Call us toll-free: 1-800-282-1351
