Rear View Camera for Cars - Rear view cameras are particularly helpful in tight parking lots, dark areas or in any place where children might be running around, such as near parks or schools. You can install as many of these rear view car cameras for your car as you would like, but owning one or two is usually enough. First off you will need to decide where you want to install the rear-view camera in your car. People tend to put them in their plastic bumper so that they won't have to drill into the car's sheet metal. Attach the rear view camera's power wire to your cars backup-light power wire. You will need to splice the two wires together. Use wire cutters to cut the wires, making sure to leave enough excess wire to reconnect. You should then strip the ends of the wire to expose the bare wire using wire strippers. Then you have to splice the wires together using a two-into-one connector. This will give the rear view camera for your car power when you put the car in reverse. Route the rear view camera for you car's output wire to the rear view monitor and then connect the wire to the monitor's input. To install the monitor you will need to see the monitor's installation instructions. Having rear view cameras on your car is like having eyes in the back of your head. These small cameras, usually the size of a quarter or smaller, are mounted on the exterior of your car and will provide you with real-time video pictures of whatever is happening outside your car. Some rear view camera systems also have backup sensors, which aid in drivers' awareness of objects behind their car. The technology behind rear view camera systems for cars has been around for a while. The components have been used in several different applications, including borescope cameras which are used to probe inside the body during medical procedures and small LCD displays found on digital cameras. Automakers have now discovered a new toy for the various components, and they are rear view camera systems for cars.