| Your personal code can consist of up to ten
sets of ten taps for millions of possible combinations. |
|
Easily programmed personal code |
|
|
Easily-seen LED flashes with each tap |
|
|
Simple verification of your code |
|
|
Permanent memory holds code |
|
|
Operates even if vehicle is running (LED normally disabled with
key "on".) |
|
|
All components located safely and securely inside your vehicle. |
|
|
Millions of codes possible! |
|
|
| Benefits of TapLock |
|
Never get locked out again! |
|
|
Never have to carry keys or remotes |
|
|
Enjoy complete freedom! Go swimming, hiking, boating, running,
playing any sport, shopping or simply taking the kids to the park! |
|
|
Enjoy the security of knowing that only you know your TapLock
code. |
|
|
Provides instant emergency access to pets or children locked in
vehicle. |
|
|
*According to 1999 AAA statistics of 1998 service calls in North America.
Just Tap your personal security code (up to 10-sets of
10-taps) onto the windshield then
TapLock™
Gets You In.
When the tiny capsule containing a microphone mounted on the inside of the
window senses the taps and compares them to the your stored personal code
and if there's a match, the power door locks open and
TapLock™
Gets You In.
All components of the
TapLock™ are located inside the
vehicle so there's nothing to carry.
TapLock™
is always ready to receive your secret code and
Get You In.
Operation:
Wake-up TapLock™
with three taps on the windshield.
The Red LED flashes to show it's "Ready".
Now tap-out your preset personal code.
When the tiny capsule containing a microphone mounted on the inside of
the window senses the taps and compares them to the your stored personal
code and if there's a match,
TapLock™
sends power to the up lock switch to activate door locks and
YOUR IN.
May also open trunk if you set it up that way.
Controller is mounted in side the vehicle and wired into the electrical
system to control the
actuators in the lock system to Get You In.
>
Programming:
Change your code as often as you like.
Press the Receiver button twice. The Red LED
flashes that it's ready to receive your new code.
Just Tap your personal security code
(up to 10-sets of 10-taps)
Directly onto the Receiver Module / windshield.
Press the Receiver button twice again and your code is locked in.
The code you entered is flashed back to verify.
Only when you change the code.
You’re Done !